For the manner in which men live is so different from the way in which they ought to live, that he who leaves the common course for that which he ought to follow will find that it leads him to ruin rather than safety.
-Machiavelli

Please visit my new blog: http://baldwinmaker.blogspot.com

Sunday, May 29, 2016

Plough Plane Iron

Regular reader, Ralph, requested that I make him a special iron for his Record plough plane. "Of course," says I.
I'll try anything once, right?

After a few emails, we made sure we were speaking the same language, and I got to work. I had to work quick, because my day job popped an emergency on me, and if I wanted Ralph to get his iron in a reasonable amount of time, I had to get it done fast.

A special width of .207". It's 3/16" thick, 3 1/2 long, A2 tool steel. The sides of the iron are beveled at 2 degrees...and that's the tricky bit...








Now...in order to make the blade, I decided to make a fixture. This is so that I can repeat the 2 degree side bevels. It is also set up to clamp different blade widths beyond the .207" blade. This pic is from the final step of making the fixture.

The completed fixture. The bottom of the fixture is milled at a 2 degree angle. With the blade clamped inside, the mill will cut the angle with no further input from me. Stable and repeatable.

Making chips!!!
Once the sawing and milling was all done, I got it into the kiln. After heat treat, I had enough time left tonight to clean it up and grind the primary bevel. A fun project, got to learn a few things, make myself a new tool, and most importantly: make a tool for a fellow craftsman.

Thanks, Ralph, for another opportunity!!!

2 comments:

  1. I have a two more irons for you now that you have a jig. I'm not too sure of the measurements I'm taking on the plywood. I have a few other things banging around in the brain bucket.

    ReplyDelete
    Replies
    1. I'll be getting this one into the mail tomorrow, so that you can have it by the weekend. With the surprise I had at work, I would have had to wait another week to finish.
      Keep your eyes peeled for a package, and let me know how it works for you!!
      Mark

      Delete