Mill Tram

Part of routine maintenance and set up of a milling machine is tramming. This is setting up the machine so that the head and table are in proper alignment. Typically this is done by swinging a dial indicator over the surface of the vice or table and adjusting as needed.

Thankfully, there's a time saving double indicator available to speed up the process.

Edge Technologies came up with this awesome set up. This is the miniature model The two indicators are 3" apart. I believe the standard model is 5". This size is good for my mill, since it is a bench top machine. Though slightly less accurate than a 5" spread, it still can set up your machine to a very high tolerance.

Mixing Shellac

Until now I've been using premixed shellac. I think those days are done. Having just finished a knife for my dad, I'm sold on the idea of mixing shellac flakes.

For a 1 pound cut, I want to use half an ounce of flakes to 4 ounces of alcohol.

Knife For My Dad

Of course, at some point, I have to make a knife for my dad. I promised him a paring knife, and here it is. I modified the pattern a bit so that it wouldn't exactly match my other paring knives. This is also the first knife that I have finished with flake shellac.
The handle is Canary wood.

New Norris Iron

I hinted about this the other day, and almost for forgot to post it.
The first part I made on my new mill is an iron for my Norris plane. I wanted to be able to use the plane without wearing out the original iron.
All done at home, from cutting to heat treating to grinding.

Seriously, isn't this the coolest thing ever? Coming out of the oven at an ungodly temperature. The iron is A2 tool steel, which means it has to be wrapped in stainless steel foil during the heat treat. You're not seeing the blade here...you're seeing the heat it's giving off THROUGH the foil! I geek out over things like this.

Mill Improvement

In using my new milling machine, so far there is only one thing that I haven't liked: the lock handles for the X and Y axis.

One of the two X axis locks.As you can see, it can hit the base of the mill as you move in the Y axis. Unless it is locked, it has a tendency to flop down.

Saddle Sqaure

Here is a simple tool that I made for work.

For my day job I build machines. Most of the machines I build or repair use a lot of 2" square tube for their frames. During the course of my day I have to add a lot of holes to the frames. Typically for hanging wires or airlines. I'd say more than 75% of the time, I'm drilling on the centerline of the tube. Most of the remaining time I'm probably going to place a hole at 1/2" from the edge.

Fruit Knife

Latest creation, a fruit knife. A2 steel, red heart handle.

This knife is the latest to come out of my work shop. I've had some trouble logging in and posting project progress. Hoping I have that fixed and I can get caught up. Got lots of stuff going on right now!