Since my wreck back in April, I have not picked up a woodworking tool in anger. Nearly six months has passed, I'm just now starting to get back to the point where I have energy left at the end of the day. Sitting around and not doing much has left me with a lot of time to think.
For the manner in which men live is so different from the way in which they ought to live, that he who leaves the common course for that which he ought to follow will find that it leads him to ruin rather than safety.
-Machiavelli
Please visit my new blog: http://baldwinmaker.blogspot.com
-Machiavelli
Please visit my new blog: http://baldwinmaker.blogspot.com
Saturday, October 5, 2013
Ain't had the time
UPDATE: Tools that are lined out have committed buyers. Others are still available.
Since my wreck back in April, I have not picked up a woodworking tool in anger. Nearly six months has passed, I'm just now starting to get back to the point where I have energy left at the end of the day. Sitting around and not doing much has left me with a lot of time to think.
Since my wreck back in April, I have not picked up a woodworking tool in anger. Nearly six months has passed, I'm just now starting to get back to the point where I have energy left at the end of the day. Sitting around and not doing much has left me with a lot of time to think.
Sunday, September 1, 2013
Gorgeous Little Folding Knife
Earlier this summer a good friend and coworker took off for brighter horizons. Before he left, he handed me one of the nicest gifts I've ever been given. To me, it's as awesome as it was unexpected. He told me it was the last one he made before he left knife making. Thank you Mr. Webb, you are an all around fine Southern Gentleman, receiving such a gift is quite an honor.
![]() |
| I'm not a knife collector, I've got a couple cheap pocket knives and a couple kitchen knives. There is something to be said for a hand made folder!! A-2 tool steel, with a pronounced hollow grind. |
Friday, August 30, 2013
He's baaaaaack
So, for the last couple of years I've dealt with spotty internet service because for some silly reason I didn't change carriers. That has finally been taken care of. Gone is the overpriced, slow, unreliable service of my old carrier (Sprint, by the way...ugh...worst service in Mil Lucky). I had no service for a few weeks while I waited for my new service to be installed (ATT, not too shabby so far).
Friday, July 19, 2013
Oh the horror!
What follows is rough account of going through a "sudden-stoppage-incident." In other words, hitting a 5,000 pound minivan on a 300 pound motorcycle. It's not a cry for sympathy or cry-baby bullshit. Just a description of an event. I don't think it's too gory for weak of stomach, but crunching bones are crunching bones after all.
Monday, June 3, 2013
Norris plane
yeah...uh...so, I may have crossed a line. I kinda sorta dropped a bunch of dough on a Norris 51. If there was ever a sign that I need to get healed up and back to work, this is it!
Just a bunch of pictures, no captions needed. The only thing to say is that I will see about making a new iron and chip breaker so that I don't use up the original.
Just a bunch of pictures, no captions needed. The only thing to say is that I will see about making a new iron and chip breaker so that I don't use up the original.
Tuesday, May 21, 2013
More reading
If I'm going to be bored, I might as well read useful stuff. This is the study of PM-V11 steel from Lee Valley. The new steel has been around a little while now, but this is the first time I sat down and read how Lee Valley did their testing. I thought it was interesting and worth sharing with others who had not read it.
I haven't tried any of the PM-V11 chisels or irons yet. None of my planes need new irons at the moment, and I can't just replace good irons. As a plane or two needs fresh steel, I will likely go the PM route.
Apologies to Lee Valley, but I doubt I'll try the PM chisels. I'm stuck on my L-N chisels. So, unless a set shows up at my house (ahem...LV...you know my address), I won't be checking them out any time soon.
Anywho, just sharing what I thought was an interesting read. Have a good evening!
I haven't tried any of the PM-V11 chisels or irons yet. None of my planes need new irons at the moment, and I can't just replace good irons. As a plane or two needs fresh steel, I will likely go the PM route.
Apologies to Lee Valley, but I doubt I'll try the PM chisels. I'm stuck on my L-N chisels. So, unless a set shows up at my house (ahem...LV...you know my address), I won't be checking them out any time soon.
Anywho, just sharing what I thought was an interesting read. Have a good evening!
Saturday, May 18, 2013
A good read
Being a Baldwin, this was of particular interest to me.
Thanks to Lost Art Press for posting the letter!
I have a small collection of E.Baldwin planes. Enos is Austin's dad. They made really good planes that are as useful today as they were 160+ years ago.
Thanks to Lost Art Press for posting the letter!
I have a small collection of E.Baldwin planes. Enos is Austin's dad. They made really good planes that are as useful today as they were 160+ years ago.
Subscribe to:
Posts (Atom)

.jpg)